MPS308 Low pH Reverse Osmosis Scale Inhibitor with a Wide Range of Applications

Binshengxiang low pH reverse osmosis scale inhibitor MPS308 has a wide range of applications. MPS308 reverse osmosis scale inhibitor is a compound liquid scale inhibitor produced by Binshengxiang Chemical. The product is formulated with multiple active substances, which can effectively control scaling on the surface of reverse osmosis equipment membranes and extend the service life of the equipment.Binshengxiang low pH reverse osmosis scale inhibitor MPS308 has a wide range of applications. The MPS308 reverse osmosis scale inhibitor produced by Binshengxiang Chemical has a wide range of applications and can be effectively applied to various types of membrane materials, receiving high praise from users. Binshengxiang Chemical looks forward to cooperating with you.

Below is an introduction to the MPS308 reverse osmosis scale inhibitor produced by Binshengxiang Chemical:

MPS308 Reverse Osmosis Scale Inhibitor

MPS308 RO Membrane Scale Inhibitor

Usage Description of MPS308 Reverse Osmosis Scale Inhibitor

MPS308 reverse osmosis scale inhibitor is a broad-spectrum, high-efficiency scale inhibitor specifically developed for reverse osmosis (RO) systems. Practical use has proven that MPS308 reverse osmosis scale inhibitor is highly effective in removing the following types of scale: calcium carbonate, calcium sulfate, barium sulfate, strontium sulfate, calcium fluoride, silicon dioxide, and iron. It can control the LSI in concentrated water up to 3.0, Fe³⁺ content up to 1.5 mg/l, and silicon dioxide content up to 185 mg/l. It can be used with reverse osmosis membranes and TFC membranes from Dow Chemical (Filmtec), Hydranautics, and domestic brands, as well as nanofiltration membrane elements.

Product Features of MPS308 Reverse Osmosis Scale Inhibitor

1. Recommended scale inhibitor by Dow Chemical (Filmtec), Hydranautics, and others.

2. Does not form insoluble precipitates with iron/aluminum oxides and silicon compounds.

3. Highly effective water treatment scale inhibitor with a wide range of applications.

4. Reduced dosage required, making it a cost-effective solution for scale control.

5. Suitable for various types of membrane materials.

6. Enables higher recovery rates in system operation.

Usage Requirements for MPS308 Reverse Osmosis Scale Inhibitor

Dosage

MPS308 reverse osmosis scale inhibitor should be continuously dosed into the feed water before it enters the membrane system. The typical dosage is 3-8 mg/l, which may vary depending on water chemistry, membrane type, and system operating parameters (such as recovery rate, temperature, and pressure). The specific dosage should be calculated using the supplier's software.

Dilution

MPS308 reverse osmosis scale inhibitor should be dosed continuously. It is recommended to dose the concentrated solution directly at the maximum frequency of the dosing pump. Alternatively, it can be diluted with RO product water or demineralized water, with a dilution factor not exceeding 10.

Physicochemical Properties of MPS308 Reverse Osmosis Scale Inhibitor

Packaging and Storage

High-strength plastic drum, 25 kg/drum

Shelf life: 2 years

Precautions

When handling this product, take labor protection measures. Avoid contact with skin and eyes. In case of contact, rinse thoroughly with plenty of water.

Binshengxiang low pH reverse osmosis scale inhibitor MPS308 has a wide range of applications. Binshengxiang Chemical has been professionally producing reverse osmosis scale inhibitors for 18 years. The company has extensive production technology experience, and its products can effectively control scaling on the surface of reverse osmosis equipment membranes and prevent fouling. We welcome users to inquire and place orders by phone.